Need help? Email us: [email protected]
1 / 6
0% OFF

Deep Sea Blue SnapSet Kiddie Swimming Pool

$39.99
0 sold
Size
Qty 9999996 in stock

Features:

[Durable and high-quality materials]: High-strength hot carbon tough PVC layer independent airbag adopts enhanced hot-melt technology, strong and not easy to break.

[Upgrade Air Leak-proof Valve]: Sturdy and durable, the inflation is placed stably. Although the load-bearing is not easy to damage, it is easy to fold and store.

[Comfortable]: Wear-resistant thermal insulation foam bottom plate, will not collide when stepped on.

[Pattern printing] The pattern is vivid and lovely, without fading, high color fastness, and soft color.

Warning

1. This baby is designed for children to play in the water outdoors. Please do not use it indoors to avoid pool water overflowing and damaging your furniture.

2. Sharp objects, gravel, and rough ground may cause serious damage to the baby.

3. Avoid baby contact with fire or other high-temperature objects.

4. Do not move the baby after filling the water to avoid damage to the baby due to pulling and rubbing.

5. Do not use an air compressor or a high-pressure pump to inflate a pool with an inflatable ring

Instructions for use:

1. After removing the baby from the color box, please unfold it and leave it for a few hours before use.

2. Before filling the water, please place the baby on a flat surface without rough objects, spread the bottom of the pool completely into a circle, and then erect the wall of the pool to start filling.

3. Stop the water injection when the water injection height reaches the water level safety line.

4. When draining water, please gently press the pool wall to release the water. Never try to pull the pool wall or lift the pool. This operation will cause serious damage to the baby.

5. There is a yellow patch (about 6x6 cm in size) in the color box. Please keep it properly. If there is slight damage to the bottom of the pool, please tear off the plastic sheet on the back to stick and repair the damaged place.

Instructions for use of patch

1. This product is self-adhesive, it can be sticky after tearing the bottom paper, easy to operate, and not sticky.

2. This product conforms to the standard, and customers can use it with peace of mind.

-Precautions

This product has strong adhesion, please use it with care.

Please use it in a well-ventilated place.

When not applicable, please store it out of children's reach.

Scope of application: all PVC inflatable products and hard rubber pools.

Instructions:

Clean and dry the surface near the slits or holes of the inflatable products.

Depending on the size of the slit or hole, cut the repair piece into an appropriate shape.

Tear off the transparent patch and stick it directly to the damaged part of the product. Wait for about 30 minutes before blowing

Gas use.

This product is a waterproof patch. It can be used in water after pasting. There is no need to worry about air leakage and detachment underwater.

drop.

  • [Durable and high-quality materials]: High-strength hot carbon tough PVC layer independent airbag adopts enhanced hot-melt technology, strong and not easy to break.
  • [Upgrade Air Leak-proof Valve]: Sturdy and durable, the inflation is placed stably. Although the load-bearing is not easy to damage, it is easy to fold and store.
  • [Comfortable]: Wear-resistant thermal insulation foam bottom plate, will not collide when stepped on.
  • [Pattern printing] The pattern is vivid and lovely, without fading, high color fastness, and soft color.